Skip to content

Monroe PMP -

Sections
Handles
:
Hand Wheels
:
Clamps
:
Knobs
:
Work Holding
:
Plungers
:
Destaco Clamps
:
Magnets
:
Pins
:
Hinges
Personal tools



RFQ
Sections
Home - Monroe
Products
Order
Register
Information Request
Request For Quote
Become a 3Sixty Company
Add to Favorites
Contact Us:
68 S. Squirrel Rd
Auburn Hills, MI 48326
Ph:800.440.3967
Fx:800.453.9683

Outside USA:
Ph: 248.844.2601
Fx: 248.844.2617

Hours of Operation:
8am - 7pm EST

ISO 9001: 2000
You are here: Home → Work Holding → Monroe: Workholding Components
Document Actions

Monroe: Workholding Components

by Tony Losey — last modified 2006-09-05 16:09
  • Grips side of work giving access to top surface for machining. 
  • Minimum clamp height allows maximum tool clearance and visibility. 
  • Hardened and Black Oxide finish.
  • 3" Taper stops slippage.
  • Teeth give "Bite" for secure hold.
  • Notch insures positive grip on angles and curves.
  • Hex wrench adjusts and locks toe.
  • 45º Angle of toe movement gives equal distribution of pressure, holding work down on table and into work stops.
  • Braized brass faces to eliminate marking of finished parts.
Toe Clamps
Toe Clamps Toe Clamps Toe Clamps
High Grip - Steel Toe Low Grip - Brass Toe High Grip - Brass Toe
 
Toe Only
Steel Face Brass Face A B C D E F G H
Low Toe High Toe Low Toe High Toe
14101 14111  ---  --- 2 5/8 1 1/2 1/8 1/4 5/16 5/16-18
14102 14112  ---  --- 2 1/2  ---  ---  ---  --- 3/4  ---  ---
14103 14113  ---  --- 3  ---  --- ---   --- 1 1/4  ---  ---
  
Standard Toe Clamp
Steel Face Brass Face A B C D E F G H
Low Toe High Toe Low Toe High Toe
14001 14010 14030 14020 4 1/16 7/8 1 1/2 1 3/16 1/4 1 1/8 1/2 1/2 - 13
14002 14011 14031 14021 5 1/2  ---  ---  ---  --- 2 7/8  ---
14003 14012 14032 14022 7 7/16  ---  ---  ---  --- 3 1 3/8  ---
  
Small Toe Clamp
Steel Face Brass Face A B C D E F G H
Low Toe High Toe Low Toe High Toe
14101 14111  ---  --- 2 5/8 1 1/2 1/8 1/4 5/16 5/16-18
14102 14112  ---  --- 2 1/2  ---  ---  ---  --- 3/4  ---  ---
14103 14113  ---  --- 3  ---  ---  ---  --- 1 1/4  ---  ---

Prior < Workholding Components > Next

© Copyright Monroe Engineering Products, Inc 2003 All rights reserved.