Skip to content

Monroe PMP -

Sections
Handles
:
Hand Wheels
:
Clamps
:
Knobs
:
Work Holding
:
Plungers
:
Custom Metal Stamping
:
Magnets
:
Pins
:
Hinges
Personal tools
Sections
Home - Monroe
Products
Order
Register
Information Request
Request For Quote
Become a 3Sixty Company
Add to Favorites
Contact Us:
68 S. Squirrel Rd
Auburn Hills, MI 48326
Ph:800.440.3967
Fx:800.453.9683

Outside USA:
Ph: 248.844.2601
Fx: 248.844.2617

Hours of Operation:
8am - 7pm EST
Monroe Cage Code
3SixtyGroup Companies
You are here: Home → Pins → Monroe: Pins
Document Actions

Monroe: Pins

by Tony Losey — last modified 2007-03-20 13:57
Quick Release Pins
 Quick Release Pins
  • Diameters are designed to fit normal drilled holes, within commercial tolerances (tight holes should be reamed or deburred). Select grip length that is slightly longer than total thickness of material through which pin will be inserted, I.e. use 1.6 grip length pin for 1 1/2 material thickness. Use 2.1 grip length for 2" thickness material. This provides for maximum safety factor.
  • Push to insert - Pull to release
  • All pins are zinc plated.
  • Other diameters, grip length, material etc., available on request

Part No. Pin Diameter
+.0 -.002 A		 Grip Length
+.032 -.0 B		 C D
PRQ-250 1/4* 0.6 7/16 1
PRQ-251 1/4* 1.1 7/16 1
PRQ-252 1/4* 1.6 7/16 1
PRQ-253 1/4* 2.1 7/16 1
PRQ-375 3/8 1.1 1/2 1
PRQ-376 3/8 1.6 1/2 1
PRQ-377 3/8 2.1 1/2 1
PRQ-378 3/8 2.6 1/2 1
PRQ-500 1/2 1.1 5/8 1 1/8
PRQ-501 1/2 1.6 5/8 1 1/8
PRQ-502 1/2 2.1 5/8 1 1/8
PRQ-503 1/2 2.6 5/8 1 1/8
PRQ-625 5/8 1.6 3/4 1 1/8
PRQ-626 5/8 2.1 3/4 1 1/8
PRQ-627 5/8 2.6 3/4 1 1/8
PRQ-628 5/8 3.1 3/4 1 1/8
PRQ-629 5/8 4.1 3/4 1 1/8
PRQ-630 5/8 4.6 3/4 1 1/8
PRQ-750 3/4 1.6 15/16 1 1/2
PRQ-751 3/4 2.1 15/16 1 1/2
PRQ-752 3/4 2.6 15/16 1 1/2
PRQ-753 3/4 3.1 15/16 1 1/2
* Single Ball

Prior < Pins > Next

© Copyright Monroe Engineering Products, Inc 2003 All rights reserved.