Skip to content

Monroe PMP -

Sections
Handles
:
Hand Wheels
:
Clamps
:
Knobs
:
Work Holding
:
Plungers
:
Destaco Clamps
:
Magnets
:
Pins
:
Hinges
Personal tools

RFQ

Paravis One Of Nation’s Best Machine Shops


Sections
Home - Monroe
Products
Order
Register
Information Request
Request For Quote
Become a 3Sixty Company
Add to Favorites
Contact Us:
1030 Doris Rd.
Auburn Hills, MI 48326


Ph:800-440-3967
Fx:800-453-9683

Hours of Operation:
8am - 7pm EST
You are here: Home → Magnets → Monroe, Magnetic: Permanent Magnetic Lifts
Document Actions

Monroe, Magnetic: Permanent Magnetic Lifts

by Tony Losey — last modified 2007-08-22 15:05

Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for two or more people when utilizing a permanent magnetic lift.


Neo-Lift
Permanent Magnetic Lifts These compact yet powerful Neo lift magnets can be used on flat or round surfaces and contain an internal release devise that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts eliminate the fear of dropping the load being lifted due to power failure.
  • Lightweight: powerful Rare Earth design for easy handling
  • Lifts flat or round loads over 1" thick
  • Easy manual release does not contact load
  • Nickel-plated pole shoes provide hardness and rust resistance
Model No. *Holding Value
(Flat Items)		 *Holding Value
(Round Items)		 Length
(In.)		 Width
(In.)		 Height
(In.)		 Handle
(In.)		 Weight
(lbs.)
PML100 220 lbs. 110 lbs. 2.44 3.62 2.64 4.96 7
PML300 660 lbs. 330 lbs. 3.62 6.38 3.58 6.10 22
PML600 1,300 lbs. 660 lbs. 4.80 9.13 4.61 7.72 53
PML1000 2,200 lbs. 1,100 lbs. 6.93 10.16 6.42 11.22 110
PML2000 4,400 lbs. 2,200 lbs. 9.21 14.88 8.35 16.77 276
PML3000 6,600 lbs. 3,300 lbs. 11.26 18.03 10.28 20.51 485
PML6000 13,200 lbs. 6,600 lbs. 16.93 23.62 13.98 7.09 926
*Holding Values are stated at 33% of the actual value.

NOTE: Never stand under load being lifted. Always Use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift and the load need to be clean & free of chips, oil, slag, dirt, etc. Lift must be centered on the load. Not recommended for paint or finish coated surface.


Previous < Magnets > Next

© Copyright Monroe Engineering Products, Inc 2003 All rights reserved.