Sections
| 3SixtyGroup Companies |
 |
 |
|
You
are here:
Home
→
Magnets
→
Mag-Mate Creative Lift Magnets
Mag-Mate Creative Lift Magnets
by
nbalcom
—
last modified
2007-12-10 15:47
 |
- Ideal for lifting steel plate, forgings, die casting and similar items!
- Creative Lift® Magnets are the proven solution to simplified machine loading and unloading, for handling steel items in receiving and shipping areas and for the fast stacking, de-stacking and transfer of steel sheets, plates, bar stock, angles and rounds. One person can perform operations previously calling for two or more people.
- Less torque required to release part
- Lift capacity clearly stated on magnet. (do not exceed this)
- No Electrical power required for operation
- Durable stainless steel casing. (will not rust or corrode)
- Use only on thick, non-flexing ferrous items
- CONFORMS TO ASME B30.20 STANDARDS
|
Holding
Value In Lbs. |
Part # |
OA
Length |
OA
Width |
OA
Handle Length |
Magnet
Ht. (in) |
Magnet
Ln. (in) |
Ship weight |
| 400 |
IM5C1382 |
9-7/8" |
3-1/2" |
9-1/4" |
3-3/16" |
6" |
12 Lbs. |
| 1000 |
IM5C1383 |
12-5/8" |
5" |
9-1/4" |
3-3/16" |
8-11/16" |
28 Lbs. |
| 1500 |
IM5C1384 |
14-7/16" |
7 " |
9-14" |
3-3/16" |
10-1/2" |
42 Lbs. |
| 1250 |
IM5C1385 |
19-5/8" |
3-1/2" |
9-1/4" |
3-3/6" |
15-3/4" |
49 lBS. |
| 3000 |
IM5C1386 |
19-5/8" |
10" |
20" |
3-3/16" |
15-3/4" |
105 lBS. |
|
Note: Never stand under load being lifted. Always use extra caution. Only use lifting magnets on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces. |
|
© Copyright Monroe Engineering Products, Inc 2007 All rights reserved.
|
|
Sections
| 3SixtyGroup Companies |
|
|
|
