Skip to content

Monroe PMP -

Sections
Handles
:
Hand Wheels
:
Clamps
:
Knobs
:
Work Holding
:
Plungers
:
Destaco Clamps
:
Magnets
:
Pins
:
Hinges
Personal tools



RFQ
Sections
Home - Monroe
Products
Order
Register
Information Request
Request For Quote
Become a 3Sixty Company
Add to Favorites
Contact Us:
68 S. Squirrel Rd
Auburn Hills, MI 48326
Ph:800.440.3967
Fx:800.453.9683

Outside USA:
Ph: 248.844.2601
Fx: 248.844.2617

Hours of Operation:
8am - 7pm EST
You are here: Home → Handwheels → Digital Position Indicators Direct Drive - DD-52
Document Actions

Digital Position Indicators Direct Drive - DD-52

by Tony Losey — last modified 2006-09-05 10:14
Digital Position Indicators Direct Drive - DD-52 Digital Position Indicators Direct Drive - DD-52
Installation Instructions for DD51 and DD52
  1. Zero set the spindle.
  2. Fit the indicator onto the spindle.
  3. Mark the machine frame by means of the rear locating pin by rotating the indicator (do not use a hammer).
  4. Pull out the indicator and drill a ø 6mm by 10mm deep hole.
  5. Re-fit the zeored indicator onto the spindle and make sure the rear pin locates into the hole.
  6. Tighten the socket head set screw.
Digital Position Indicators Direct Drive - DD-52
example: CE986154
DD52-AN-0001.0S		 Ordering information
Fits 1/2" shaft
Type DD51
Dial location AN
Reading after 1 revolution 001.0
d-Clockwise, S-Counter clockwise
Rotation direction increasing		 S

Part No Reduction Sleeve - Metric
CE87940 20MM To 12MM
CE87950 20MM To 14MM
CE87960 20MM To 15MM
CE87970 20MM To 16MM
Part No Reduction Sleeve - Inches
CE987940 3/4" To 1/4 "
CE987950 3/4" To 3/8"
CE987960 3/4" To 1/2 "
CE987970 3/4" To 5/8"
DD52 Part No. Description MAX RPM
CE986103 DD52-AN-000.5OD 500
CE986104 DD52-AN-000.50-S 500
CE986133 DD52-AN-001.00-D 250
CE986134 DD52-AN-001.00-S 250
CE986153 DD52-AN-0001.0-D 1500
CE986154 DD52-AN-0001.0-S 1500
CE986183 DD52-AN-0002.0-D 1250
CE986184 DD52-AN-0002.0-S 1250
CE986603 DD52-AR-000.50-D 500
CE986604 DD52-AR-000.50-S 500
CE986633 DD52-AR-001.00-D 250
CE986634 DD52-AR-001.00-S 250
CE987103 DD52-FN-000.50-D 500
CE987104 DD52-FN-000.50-S 500
CE987133 DD52-FN-001.00-D 250
CE987134 DD52-FN-001.00-S 250

Prior < Handwheel > Next

© Copyright Monroe Engineering Products, Inc 2003 All rights reserved.