Monroe PMP -

Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit.

• Adjustable from 1000 to 5000 PSI
• SAE or manifold mount styles
• Internal check valve allows free flow in reverse direction
• Automatically reopens to replenish lost pressure

Sequence valves control the order of events within a hydraulic system by directing pressure to individual circuits in a pressure controlled sequence.

• Sequence pressure range is adjustable from 0 to 4000 PSI
• 5000 PSI maximum rating
• Will not reduce final pressure to the secondary circuit
• Suitable for single and double acting circuits

These pilot operated check valves are of a unique poppet style design making them ideal for pallet applications.

• Replaceable cartridge design valve
• Filters in all three prots
• 5000 PSI maximum operating pressure
• SAE fluid ports

StrongHold manual directional control valves are three- way/four-way, two position hydraulic valves. Their zero leakage design makes them ideal for constant pressure workholding applications.

• 5000 PSI maximum operating pressure
• For single acting or double acting circuits
• SAE ported or manifold mount versions
• Infinite handle adjustment

StrongHold manual pallet valve allows the pump to be disconnected from the pallet after the fixture has been clamped, allowing flexible machining center applications to realize the advantages of hydraulic workholding.

• 5000 PSI working pressure
• Single acting applications
• SAE ported or manifold mount versions
• Inlet and outlet filtration

StrongHold flow control valves are needle type multiple turn flow restictor valves which provide finely adjustable flow control for components or circuits requiring reduced flow rates.

• 5000 PSI maximum operating pressure
• Reverse free-flow check valve version
• Flow restricted in both directions version

None

None

StrongHold remote mounted solenoid control valves are designed for applications where electrical control of clamping circuits is required.

• 5000 PSI maximum operating pressure
• 3-way/4-way, 2 position, detented
• For single or double acting systems
• Tank port check valve is standard

StrongHold remote mounted air pilot control valves are designed for applications where pneumatic control of clamping circuits is required.

• 5000 PSI maximum hydraulic operating pressure
• 50 PSI min./150 PSI max. air pressure
• Tank port check valve is standard

StrongHold DCV Series valves are configurable hydraulic directional control valves.

• 3000 or 6000 PSI max. pressure versions
• Side or bottom port, or manifold versions
• Various flow configuration versions
• Nitrile, Viton or EPR seal versions