Skip to content

Monroe PMP -

Sections
Handles
:
Hand Wheels
:
Clamps
:
Knobs
:
Work Holding
:
Plungers
:
Custom Metal Stamping
:
Magnets
:
Pins
:
Hinges
Personal tools
Sections
Home - Monroe
Products
Order
Register
Information Request
Request For Quote
Become a 3Sixty Company
Add to Favorites
Contact Us:
68 S. Squirrel Rd
Auburn Hills, MI 48326
Ph:800.440.3967
Fx:800.453.9683

Outside USA:
Ph: 248.844.2601
Fx: 248.844.2617

Hours of Operation:
8am - 7pm EST
Monroe Cage Code
3SixtyGroup Companies
You are here: Home → Push Pull Cam Clamps → Monroe: Cam Push / Cam Pull Clamps
Document Actions

Monroe: Cam Push / Cam Pull Clamps

by Tony Losey — last modified 2008-03-10 12:54
Cam Push / Cam Pull Clamps

Cam Push / Cam Pull Clamps
Model CP1005 - CP1008
1101 lbs nominal holding force

Features:
These clamps are offered in four configurations- push action or pull action in either right or left hand rotation. The cam gives 3/8" of fast travel to approach the work-piece, and a maximum of 5/64' clamping stroke.

The mechanism is totally enclosed to avoid finger traps and the ingress of dirt or metal cuttings.

Specification:
All external parts are finished semi-black except the knob which is dull red plastic.  The cam roller and the cam faces are case hardened to minimize wear.

Installation:
It is essential that the clamps are installed to clamp on the 'clamping stroke'.  Clamping on the 'fast travel' part of the stroke can result in the clamp releasing itself, and allowing the clamp to reach the end of its 'clamping stroke' does not ensure secure clamping.

Hand force only should be used in closing the clamps as over tightening with a hammer of lever can result in damage to the unit.

Prior < Clamping Products > Next

MONROE PMP,
Copyright © 2004 All rights reserved.