LU200H Latch Clamps 441 lbs nominal holding force	LU200HSS Latch Clamps 441 lbs nominal holding force	LU400H Latch Clamps 881 lbs nominal holding force	LU400HSS Latch Clamps 881 lbs nominal holding force	LU700H Latch Clamps 1542 lbs nominal holding force
LU700HSS Latch Clamps 1542 lbs nominal holding force	LU2000H Latch Clamps 4405 lbs nominal holding force	LU4000H Latch Clamps 8811 lbs nominal holding force	LU200V Latch Clamps 441 lbs nominal holding force	LU200VSS Latch Clamps 441 lbs nominal holding force
LU400V Latch Clamps 881 lbs nominal holding force	LU400VSS Latch Clamps 881 lbs nominal holding force	LU700V Latch Clamps 1542 lbs nominal holding force	LU700VSS Latch Clamps 1542 lbs nominal holding force

Features:
Latch clamps are available in two configurations; horizontal, with the clamp and latch bracket in the same plane (LU200H, LU400H, LU700H, LU2000H and LU4000H) or a vertical (corner) configuration, the clamps and bracket being right angles to each other ( LU200V, LU400V, LU700V, LU2000V and LU4000V).

All latch clamps are fitted with PVC handle grips.

Specification:
The components of both variants of LU200, Lu400 and LU700 clamps are of zinc plated and passivated steel, the rivet being of stainless steel and rotating in the close-toleranced hole of hardened parts or in hardened bushings. The handle and the trunnion which holds both 'U'-bolts are also hardened to resist wear.

Clamps LU2000H and LU4000H have precision cast steel bases and latch brackets and handles of S.G. iron.

Installation:
It is important that the clamp and latch bracket of horizontal (H) variants are in alignment when viewed from both the top and the side to ensure that the clamp locks over center correctly.

Vertical (V) variants should be in alignment when viewed from the top, and, when viewed from the side, the base of the latch bracket should be aligned with the flat front edge of the clamp base and at right angles to it.

The 'U' bolt should be adjusted to ensure an equal pull on either side.

Prior < Clamping Products > Next

MONROE PMP,
Copyright © 2004 All rights reserved.